Standard Error Calculator
Use this standard error calculator to find the standard error of a mean, a proportion, or a set of raw data in seconds. Enter your sample values, choose a confidence level, and see the standard error, a confidence-interval preview and every step of the working — free, with no sign-up.
The standard error is the standard deviation of the sampling distribution of an estimate. It measures how much a sample mean or proportion would typically vary from sample to sample. For a mean, SE = s / √n, where s is the sample standard deviation and n is the sample size.
Enter your sample
Sampling distribution of the estimate. The shaded band is the 95% confidence-interval preview.
Calculation
What is standard error?
The standard error (SE) is the standard deviation of the sampling distribution of an estimate. Imagine you took the same survey many times: the sample mean would change a little each time, and the standard error tells you how much those sample means would typically spread around the true population value. A small standard error means your estimate is precise; a large one means it could easily be quite far from the truth.
That is why the standard error is not the same as the standard deviation. The standard deviation describes how spread out the individual values in one sample are, while the standard error describes how much the estimate itself would vary across repeated samples. To find the spread of your data first, use our standard deviation calculator; the difference between using a population and a sample value is explained in our guide to population vs sample standard deviation.
Standard error formula
The formula depends on what you are estimating:
- Mean: SE = s / √n, where s is the sample standard deviation and n is the sample size.
- Proportion: SE = √(p̂(1 − p̂) / n), where p̂ is the sample proportion.
- Raw data: first calculate the sample standard deviation s from the data, then use SE = s / √n.
All three formulas share the same idea: the standard error falls as the sample grows, because √n is in the denominator. It also rises with the variability in the data, because a larger s (or a proportion near 0.5) gives a larger standard error.
Standard error vs standard deviation
Standard error and standard deviation answer different questions. The standard deviation describes your data; the standard error describes your estimate. If you report how spread out the measurements in a sample are, quote the standard deviation. If you report how precisely a sample mean or proportion estimates the population value, quote the standard error.
| Standard deviation (SD) | Standard error (SE) | |
|---|---|---|
| Measures | Spread of individual values in a sample | Spread of the estimate across repeated samples |
| Symbol | s (sample) or σ (population) | SE |
| Formula | s, from the data values | s / √n for a mean |
| Shrinks as n grows? | No — it settles near the population SD | Yes — it falls with 1 / √n |
| Use it to | Describe variability in the data | Judge precision and build confidence intervals |
Read the full comparison in our standard error vs standard deviation guide.
Why does the standard error shrink as n grows?
The short answer is in the formula: SE = s / √n, so the sample size sits in the denominator. As n grows, √n grows and the standard error falls — but only with the square root. Quadrupling the sample (from n = 25 to n = 100) halves the standard error, while doubling it cuts the standard error by only about 29%. That is why larger samples give diminishing returns: each extra observation helps less than the one before.
Behind this is the central limit theorem: as samples get larger, the sampling distribution of the mean becomes narrower and more bell-shaped, so the mean of any one sample is more likely to land near the true population mean.
How to use this standard error calculator
- Choose a mode: Mean, Proportion or Raw data.
- For a mean, enter the sample standard deviation (s) and the sample size (n); add the sample mean if you want the confidence-interval preview.
- For a proportion, enter the sample proportion (p̂) and n — or switch to successes and enter x and n instead.
- For raw data, paste your numbers separated by commas, spaces or line breaks.
- Pick a confidence level (90%, 95% or 99%) and read the standard error, the confidence-interval preview and the step-by-step calculation.
Standard error and confidence intervals
The standard error is the building block of a confidence interval. A confidence interval is the estimate, plus or minus a margin: CI = estimate ± z × SE, where z is 1.645 at 90%, 1.96 at 95% and 2.576 at 99%. The margin of error is simply z × SE, so a smaller standard error gives a narrower, more useful interval. For the full margin calculation, see our margin of error calculator; to build an interval from a mean and standard deviation, use our confidence interval from mean and standard deviation calculator, or the confidence interval calculator.
Worked examples
Example 1 — mean. With s = 10 and n = 25, SE = 10 / √25 = 10 / 5 = 2.00. For a mean of 50, the 95% margin is 1.96 × 2.00 = 3.92, so the confidence-interval preview is [46.08, 53.92].
Example 2 — proportion. With p̂ = 0.50 and n = 100, SE = √(0.50 × 0.50 / 100) = √0.0025 = 0.05. The 95% margin is 1.96 × 0.05 = 0.098, so the preview is [0.402, 0.598]. The sampling distribution of a sample proportion is widest at p̂ = 0.50, which is why this is the largest standard error for n = 100.
Example 3 — raw data. For the values 10, 12, 14, 16, 18, the mean is 14 and the sample standard deviation is s ≈ 3.162. With n = 5, SE = 3.162 / √5 ≈ 1.414, and the 95% preview is [11.23, 16.77].
Example 4 — proportion from counts. With x = 60 successes in n = 200 trials, p̂ = 60 / 200 = 0.30, and SE = √(0.30 × 0.70 / 200) ≈ 0.0324. The 95% preview is approximately [0.236, 0.364].
Frequently asked questions
What is the standard error of the mean?
The standard error of the mean is the standard deviation of the sampling distribution of the sample mean. It is calculated as SE = s / √n, where s is the sample standard deviation and n is the sample size. It tells you how far a sample mean is typically likely to be from the true population mean.
How do you calculate standard error?
For a mean, divide the sample standard deviation by the square root of the sample size: SE = s / √n. For a proportion, use SE = √(p̂(1 − p̂) / n). For raw data, first find the sample standard deviation s, then divide by √n.
What is the difference between standard error and standard deviation?
The standard deviation measures how spread out the values in one sample are. The standard error measures how much an estimate, such as the sample mean, would vary across repeated samples. The standard deviation describes data; the standard error describes the precision of an estimate.
Why does the standard error decrease when the sample size increases?
Because the sample size is in the denominator of the formula, SE = s / √n. A larger n makes √n larger, so the standard error gets smaller. The fall follows the square root, so quadrupling the sample halves the standard error, while doubling it reduces it by about 29%.
What is a good standard error?
There is no single good value: it depends on the units of your data and what the estimate is used for. A standard error is small when it is tiny compared with the size of the effect or estimate you are judging — for example, when the confidence interval is narrow enough for the decision you need to make.
Can the standard error be negative?
No. The standard error is a standard deviation, and a standard deviation is never negative. It is 0 only if every value in the sample is identical (s = 0) or, for a proportion, if p̂ is 0 or 1.
How do you find the standard error from raw data?
First calculate the mean of the data, then the sample standard deviation s (using n − 1 in the denominator), then divide s by √n. Paste your numbers into the Raw data mode of the calculator above and it will show the mean, s and the standard error with every step.
What is the standard error of a proportion?
For a sample proportion p̂ from n trials, the standard error is SE = √(p̂(1 − p̂) / n). For example, with p̂ = 0.50 and n = 100, SE = √(0.25 / 100) = 0.05. If you know the number of successes x instead, use p̂ = x / n first.
References
For the statistical background, see the NIST/SEMATECH e-Handbook of Statistical Methods, Confidence Limits for the Mean, which gives the confidence interval for a mean as the sample mean plus or minus a multiple of s / √n — the standard error.
More tools to explore
Keep exploring: browse all tools, or try the Margin of Error Calculator, the Standard Deviation Calculator and the Sampling Distribution of a Sample Proportion Calculator.